Smartphones from Google do have their own power in the eyes of the public. After the Pixel 6 was unveiled, now it’s the turn of the Google Pixel 6a which has started to appear in rumors of its presence. The first render of the Google Pixel 6a has now appeared. The rendering was leaked by 91Mobile in collaboration with OnLeaks, where the previous renders were quite revealing. It’s not surprising that it looks similar to the Pixel 6.
Google Pixel 6a is not Equipped With an Audio Jack
Based on OnLeaks information, the physical dimensions of this smartphone are smaller than the regular Pixel 6. Has a thickness of 8,7mm and a maximum of 10,4mm on the camera module.
The placement of the camera sensor on this device is also slightly different. There are two camera sensors that are located closer to the left of the module. While the LED flash is pinned on the right edge. At this time there is still no clear information about the camera sensor setup. However, so far the Pixel A series has always used the same sensor as the regular Pixel. Based on the rumors circulating, the sensor will be a level below the latest Pixel. So most likely will still carry the Sony IMX363.
On the side, it can be seen that this smartphone has a SIM card slot on the left side. Then on the right, there is the power button above the volume buttons. But unfortunately, there is no visible 3.5mm audio jack.
Has an In-Screen Fingerprint Sensor
It is reported that the Pixel 6a will use a smaller screen, which is 6.2 inches, complete with an in-display fingerprint sensor. Its RAM capacity is estimated to be between 6/8GB with 128GB of internal storage. As for the chipset, it will use the Google Tensor chipset. The chipset is not the best in benchmarks, but it has excellent AI capabilities. Able to provide features such as Magic Eraser to remove distracting objects in photos. For those of you who are waiting for this smartphone, it will most likely be released in mid-2022.